Honda Rebel Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
So I bought a new mini speedometer for my 2006 Rebel 250 and I was able to wire the back light properly, but I’ve been having issues trying to wire the turn signal, high beam and neutral light. The new speedometer only has one wire for each of those things and the wires from the bike have two wires how am I supposed to connect them to the one wire
 

·
Super Moderator
Joined
·
3,800 Posts
you may not be able to without blowing fuses and burning wires - some circuits on the rebel are switched on the hot wire and some are switched on the ground - mix them up the wrong way and you get bad results
 

·
Registered
Joined
·
7 Posts
So I bought a new mini speedometer for my 2006 Rebel 250 and I was able to wire the back light properly, but I’ve been having issues trying to wire the turn signal, high beam and neutral light. The new speedometer only has one wire for each of those things and the wires from the bike have two wires how am I supposed to connect them to the one wire
Let me know how this goes. This is one of the things on my to do list.. original speedo broke
 
1 - 3 of 3 Posts
Top