Honda Rebel 250 & 450 Forum banner
1 - 14 of 14 Posts

·
Premium Member
1985, 86 CMX250C, 81 CM200T, 74 CL360, Invisible to cages, treat them accordingly. Avoids Road RAGE!
Joined
·
3,618 Posts
I was going to ask, it's definitely does not look like a Rebel.
What are they? If the front rim is an indication, and they are the same size as the Rebel, I might want those. I've wanted alloy wheels for my bike for a while.
 

·
Super Moderator
1987 CMX250C AC
Joined
·
3,674 Posts
I have Johnny Pag BarHog and the Spyder 300 service manuals which bear no resemblance to above images..
IMO the bikes appear to be Baja Motorsports PX250S Hensim Phoenix which I have parts list/fiche for..
Fuel tank Wheel Tire Vehicle Automotive fuel system
 

·
Premium Member
1985, 86 CMX250C, 81 CM200T, 74 CL360, Invisible to cages, treat them accordingly. Avoids Road RAGE!
Joined
·
3,618 Posts
A little research, it definitely does appear to be at Baja Phoenix 250! Another Rebel copy. But when you make something great, people copy it.
 

·
Super Moderator
1987 CMX250C AC
Joined
·
3,674 Posts
fined tens of thousands of dollars against each motorcycle not complying with US EPA regulations..

"According to the EPA, each unacceptable motorcycle was imposed a fine USD32,500.00 maximum from March 16, 2004 to Jan 12, 2009 and each motorcycle was imposed a fine USD 37,000.00 after Jan 13, 2009. Therefore, EPA shall have the right to impose the maximum fine USD 2.36 billion"

probably why they weren't sold for more years..
 

·
Premium Member
1985, 86 CMX250C, 81 CM200T, 74 CL360, Invisible to cages, treat them accordingly. Avoids Road RAGE!
Joined
·
3,618 Posts
That's a lot of fines! Wow!
But, if we don't fix those motorcycles just take parts that we like off of them and use those parts, if they're good enough, that should be okay I guess. Can't use the engine, that's for sure!
 

·
Super Moderator
1987 CMX250C AC
Joined
·
3,674 Posts
Ah anyone who installs pod filters violates EPA
It's not like states smog motorcycles.. I wouldn't worry about the motor emissions if it runs..
 

·
Super Moderator
Joined
·
32,775 Posts
Seller: What are the lengths and diameters of both axle bolts?

I see the rotor is on the left side, so it may fit the second generation Rebel forks.
 

·
Super Moderator
1987 CMX250C AC
Joined
·
3,674 Posts
RIM, FRONT 2.5X16
RIM, REAR 3.0X15
No indication of axle bolt, bearing, seal, or spacer sizes.. they all carry a Baja motorsports part number.
 

·
Super Moderator
Joined
·
32,775 Posts
These aren't OEM Rebel carbs and I wouldn't recommend them. OP hasn't visited the forum since making this post, so you aren't likely to get a response.
 
1 - 14 of 14 Posts
Top