Honda Rebel 250 & 450 Forum banner
  • Hey everyone! Enter your ride HERE to be a part of November's Ride of the Month Challenge!
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello first time posting on forum. I recently bought a 97 rebel 250, and wanted to start doing maintenance on my own, but I noticed this screw missing, I was wondering if anyone could tell me what size these usually are because I didn't want to bother trying to take out the stripped one before knowing what to replace them with. Thank you in advance!
Motor vehicle Automotive tire Gas Engineering Auto part
 

Attachments

·
Super Moderator
1987 CMX250C AC
Joined
·
3,098 Posts
I think you will find 5x8 mm or 5x10mm will work
I can find no listing in any 2nd generation 250 parts fiche..
Sooo going to 83 CM250 the diameter is 5mm but over 1/2" long 16mm and the 86 CMX450 is 5x10mm but bracket is of slightly different design..
Use a tooth pick and measure depth needed.. adjust my recommendation as needed..
 
1 - 3 of 3 Posts
Top