crankshaft oil seal that typically leaks is found behind the alternator flywheel inside the left side cover which should be clean and dry of any oil.. paper gasket is basically used to keep water from infiltrating into the left side cover as there is a weep channel cast into bottom of left cover that is open to the atmosphere..
You will need a 16X1.5mm bolt between 60-80mm long to remove flywheel..
Or spend the big bucks and buy Honda's flywheel removal tool part # 07733-0020001
![Tool Titanium Steel Composite material]()
![Arm Jaw Gesture Font Elbow]()
Wet Clutch is located behind the right side cover, there are a couple of 16mm Nuts that fit the bill
www.partzilla.com/catalog/honda/motorcycle/1985/cmx250c-a-rebel-250/clutch
Members here have had good luck with Chinese replacement clutch that comes assembled in basket, new springs, etc. found on eBay..
You will need a 16X1.5mm bolt between 60-80mm long to remove flywheel..
Or spend the big bucks and buy Honda's flywheel removal tool part # 07733-0020001
Wet Clutch is located behind the right side cover, there are a couple of 16mm Nuts that fit the bill
www.partzilla.com/catalog/honda/motorcycle/1985/cmx250c-a-rebel-250/clutch
Members here have had good luck with Chinese replacement clutch that comes assembled in basket, new springs, etc. found on eBay..
