Honda Rebel 250 & 450 Forum banner
1 - 5 of 5 Posts

·
Super Moderator
1987 CMX250C AC
Joined
·
3,674 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #3 · (Edited)
Mine is single actually ...was considering going to the double as there are several available online here but I don't know whether they'll b worth it . Also considering the big bore kit
₫ 3,597,481 | Big Bore Cylinder Piston Rebuilt Kit 57.4mm 280cc for Honda Rebel CA250 CMX250 96-11 CMX250C 03-11 Motorcycle Engine Parts
₫ 3,126,087 | Motorcycle CylinderKit For Honda EFI CBT250 CA250 Rebel CMX250 DD250 CBT CA CMX DD 250 249cm³ 55mm
₫ 1,825,536 46%OFF | Brand New High Performance Carburetor Dual Carbs Fit for Honda Rebel CA CMX 250 C CMX250/CA250
Thanks again
 

·
Premium Member
1985, 86 CMX250C, 81 CM200T, 74 CL360, Invisible to cages, treat them accordingly. Avoids Road RAGE!
Joined
·
3,618 Posts
I've only heard about 1 success story when someone used the big bore kit. There may be more. But, I've heard of several failures.
Some say the parts don't fit right. Others have had other issues with them.
But, the 1 success story... he sounded quite happy with it.
Just do your research. 👍
 
  • Like
Reactions: SoakedKarma

·
Super Moderator
1987 CMX250C AC
Joined
·
3,674 Posts
You have an engine that wasn't imported to North America..
appears to be short run february 1990 through january 1996 asian market

it is the same engine design imported from China used on Johnny Pag Spyder 300 or Hensim Phoenix 250cc along with numerous off brand low cost motorcycles and outdoor vehicles..

Left front and rear engine side covers are not like any North American import from japan.
Baja Motorsports Phoenix 250 Phx250 side cover has same arching mating surface between front and rear left side cover as your engine..
Fuel tank Automotive fuel system Vehicle Automotive tire Tire
 
1 - 5 of 5 Posts
Top