Hi, I have an 86 rebel 250, and I’m looking for a carb rebuild kit. I’m not sure which one to get though, and if it will fit. Any suggestions?
This will work great, thanks!all you should really need are the gaskets and float valve needle
Type : Repair Kit. Sold as : Kit. Each kit contains float bowl gasket or float bowl o-ring, float needle or float valve assembly and O-rings to rebuild one O.E.M. carburetor body. (unless otherwise noted).www.ebay.com
with proper cleaning the brass parts don't need to be replaced..
Quality Japanese full kit is the Keyster KH-1298N for our 1st gen 85-87 CMX250C
be advised if you replace needle you also have to replace needle jet as a set..
parts #2 in this image
View attachment 111324
the keyster needle is smaller in diameter with different taper angle than original equipment.
I would expect to find same situation with other suppliers of needle and needle jet..
View attachment 111323