Honda Rebel 250 & 450 Forum banner

Bought New Old Stock Exhaust

263 Views 5 Replies 3 Participants Last post by  Blackpowder
Hi All
I got my hands on this "highway hawk fatpipes" exhaust.
The retailer had it tucked away since 2011, still new in the box.

Its meant for the 125cc version.
But after reading stories on this forum, they sometimes just need a little bend, to clear the lower frame. Other than that, they should fit.

I havent really dealt with, the exhaust part yet on this bike.

Can anyone tell me what I need?
Like exhaust collars
Comfort Packing materials Automotive design Plastic bag Linens

Finger Carbon Auto part Automotive exterior Gas

Tableware Dishware Grey Napkin Rectangle

and stuff.
Its 35mm in the picture.
See less See more
  • Like
Reactions: 1
1 - 1 of 6 Posts
It's fairly simple to remove the exhaust. I think you'll get a better idea of what steps you need to take by removing the exhaust and mocking it up. use a dry erase marker to mark clearance issue areas and use a seamstress tape to take measurements so you can figure what you need to make clearance happen.
1 - 1 of 6 Posts