Honda Rebel Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
This bike was given to me. The bike was kind of stripped..previous owner wanted to make a bobber out of it. I have looked for OEM parts.. exhaust, switch controls and such with no luck. Wondering If I could reference (website) anything that may have parts for this bike or compatible newer year parts that will work. Any info would help.
Thanks!
 

·
Super Moderator
1987 CMX250C AC
Joined
·
2,376 Posts
Welcome to the forum
@Emil bought a nice set of aftermarket handlebar switches

before spending bucks I'd make sure engine runs..
that can be done by hot wiring which I won't explain in an open forum by PM only..
 

·
Super Moderator
Joined
·
30,831 Posts
Welcome to the forum. Here's what I got with a CM250 search on ebay: cm 250 | eBay Quite a few new, and used parts.
 

·
Super Moderator
1987 CMX250C AC
Joined
·
2,376 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #6 ·
Anybody got any leads on an exhaust the one on my bike is bad. I could probably weld it but was wondering if anybody knew where to find a good used one or maybe one that is compatible from another year/bike model.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #9 ·
What about cutting off the bad mufflers and using a slip on? Has anybody done that? Would be more cost effective for sure..
 

·
Super Moderator
1987 CMX250C AC
Joined
·
2,376 Posts
several members have installed slip on mufflers
type "slip on" in Search Community bar at top of page i get links to past threads on the subject
 
1 - 10 of 10 Posts
Top