Honda Rebel 250 & 450 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Jumping Into this topic, my right plunger tip broke off as I pulled it off since it was also seized, right where the harness pulls it in and out. Any other bike use the same type of plunger? I saw a CBR1000 that has a similar plunger but I don’t know if the dimensions will match. Also, if I get a pull plunger from a 250… would it work? Or does it have to have the needle at the tip as well. Thanks guys 👍🏻
 

·
Registered
Joined
·
11 Posts
No the 250 plunger won't work.. the 250 plunger neck is far to short.
16046-ME5-671 coding indicates part was originally designed for 1983 CB650 (Nighthawk)
It was used in some 40 Honda versions between 1983 and 2002..
Thank you so much for looking this up. I was able to find a replacement 🤙🏼🤙🏼
 
1 - 2 of 2 Posts
Top