Honda Rebel 250 & 450 Forum banner
1 - 2 of 2 Posts

·
Super Moderator
1987 CMX250C AC
Joined
·
3,385 Posts
only need an ultrasonic large enough to be able to submerge the plungers..

heat the exterior area with torch
 

·
Super Moderator
1987 CMX250C AC
Joined
·
3,385 Posts
Jumping Into this topic, my right plunger tip broke off as I pulled it off since it was also seized, right where the harness pulls it in and out. Any other bike use the same type of plunger? I saw a CBR1000 that has a similar plunger but I don’t know if the dimensions will match. Also, if I get a pull plunger from a 250… would it work? Or does it have to have the needle at the tip as well. Thanks guys 👍🏻
No the 250 plunger won't work.. the 250 plunger neck is far to short.
16046-ME5-671 coding indicates part was originally designed for 1983 CB650 (Nighthawk)
It was used in some 40 Honda versions between 1983 and 2002..
 
1 - 2 of 2 Posts
Top