Honda Rebel 250 & 450 Forum banner
  • Hey everyone! Enter your ride HERE to be a part of November's Ride of the Month Challenge!
1 - 11 of 11 Posts

·
Registered
Joined
·
3,871 Posts
Discussion Starter · #1 ·
Just got this in the mail Sat.

Still need to get the rear axle brackets. But don't know which setup I need.

1", 3/4", or the 5/8". The brackets will work with all 3 axle setups.
So does anyone know the rear axle sizes on the 250 and the 450.
Thanks guys yall are the greatest.
 

·
Registered
Joined
·
3,871 Posts
Discussion Starter · #2 ·
I can get axle frame tabs in 17mm and 20mm.
 

·
Registered
Joined
·
3,871 Posts
Discussion Starter · #5 ·
That's why I'm needing to find out the rear axle size for the 250 and 450. So I can get the right size rear axle fixtures.
 

·
Registered
Joined
·
3,871 Posts
Discussion Starter · #7 ·
According to the service manuals the 250 axle is 14mm and the 450 axle is 16mm.
Thanks Mojo. I know I can get a 16mm setup because that's the same size as xs650.
 

·
Premium Member
85,86,87 CMX250C, 81 CM200T, 74 CL360, Invisible to cages, treat them accordingly. Avoids Road RAGE!
Joined
·
2,740 Posts
That would have to be the thread size. If it was the head size it would never be able to take the stress of even the 250.
I'm used to dealing with standard sizes. 14 mm is almost identical to 9/16". And I know that the axle for the back of the Rebel 250 is about 9/16".
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top