Honda Rebel 250 & 450 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 3 Results
  1. Wrenching - General Discussions & Tech Talk
    I am reassembling the top end on a 2008 250 Rebel. According to the manual, I should find TDC and align the cam sprocket marks with the top of the head, then attach one bolt through the sprocket to the cam shaft. Next: rotate the engine 360 deg, and install the second sprocket/cam shaft bolt...
  2. Rebel 450
    I can't seem to find any info on Rebel 450 timing, only for the 250. The are 2 lines on the cam gear opposite each other. When the crank is lined up at TDC where should the marks be? I have it at the top of the compression stroke with the crank marks lined up and the cam lines are horizontal...
1-2 of 3 Results