Honda Rebel Forum banner

rebel

  1. Rebel 450
    I bought an 86 cmx450c not too long ago and im deciding to give it the bobber treatment. The back fender has been totally removed and im wondering how i would install a solo springer seat to it without mending it too much or breaking the bank since im only 19 :/ I get the main jist of it but...
  2. Rebel 450
    I am still struggling to find out why my 450 will not run. It engages sometimes but still doesn’t start, the past few days i check the starter motor, make sure carb has fuel, make sure my battery is charged and I try for a good 10 minutes then my battery dies. And it sounds like 80% of the time...
  3. Wrenching - General Discussions & Tech Talk
    Hey guys, Trying to figure out if this is the original license plate bracket for my ‘86 Rebel. I can’t seem to find a picture online of a stock one. Thanks y’all
  4. Wanted
    Hello I’m newer to the motorcycle community as I’m 16 and just bought an ‘86 450 Rebel and, i’m In search of the left and right cylinder head to carburetor mounts, as they are discontinued sadly :(. I’m located in Bc Canada and would love some information on where to find them or if anyone has...
  5. New Member Introductions
    Buying an 86 450 with 200 miles on it in mint condition. I’m a new rider with some experience. It’s not going to be my main form or transportation but I do plan on racking up a ton of miles.
  6. Travel Log
    First time taking my rebel out for a day trip and ended up putting over 200 miles on this bad boy!
  7. Honda Rebel Room
    Hey guys! So I've had my 85 Honda Rebel since December and about last week, she started struggling to get out of first gear. It's not that I don't know how to start off in first gear. I had done everything as usual and the moment the clutch engaged, she lurched and stalled. Now, once I feel the...
  8. Cool Mods, Detailing & Appearance
    Hey everyone, So i am new to forums and tried digging around everywhere to find information but fell short so I thought I would start a new thread. My buddy gave bought a Triumph Thruxton and gave me his old 2002 Rebel that is currently bobbed. I find the more "standard" riding position more...
  9. Engine, Carburetor, Fuel System & Exhaust
    Hello all and welcome, I've been having problems with my 125 rebel. The engine bogs under throttle, it runs better when the rubber air intake is taken off the airbox. I have replaced the air filter but that did not aid it. The carb has been ultrasonicly cleaned and the float needle is in great...
  10. Engine, Carburetor, Fuel System & Exhaust
    Picked up my first bike not too long ago and need some advice. Grabbed an 08 off craigslist with 190 miles on the clock and seemed to have been well taken care of during those years it sat. In a few months I've got her up to 8xx miles and she's been running great up until about a week ago when I...
  11. New Member Introductions
    Hello fellow riders, new member here made an acc to get some help solving this pesky issue... I have a 2002 honda rebel 250 with less than 8,000 miles on it. Its been a great little bike, trying to ride as much as i can before it gets too cold here. But recently its been having acceleration...
  12. Cool Mods, Detailing & Appearance
    I'm not sure if there's a technical term for it, but I love the way the straight seats look on bikes like the Triumph Scrambler or an older Honda CB. I'm going for the general aesthetic but I also feel I would be more comfortable on this as it allows me to sit further back as well as being...
  13. Engine, Carburetor, Fuel System & Exhaust
    Does anyone have any info about what size the mounting screws for the float bowl on a 2002 Rebel are?
  14. Honda Rebel Room
    hey guys, i´m david from germany, i´m 15 years old and i have an old honda rebel 125ccm motorcycle from my father. i want to build it into a bobber. maybe you have some tips for goodlooking parts or something like that. and can somebody tell me the maximum wheel sizes ( front and rear) that fits...
  15. Honda Rebel Room
    Does anyone know where I can get new pipes for an 85' Honda Rebel?
  16. Wrenching - General Discussions & Tech Talk
    Alright so I know I am new to the biking world and also to the honda rebel world but over the past few weeks of owning a used rebel I have stumbled upon a really effective way of revamping and renewing the rebels engine that wasn't properly cared for before I bought it. I am not claiming these...
  17. New Member Introductions
    Hey everyone. I'm a 22 year old college student in Starkville Mississippi majoring in broadcasting. I picked up my 2008 CMX250 rebel just yesterday and have already logged over 90 miles! Not to mention getting over 80 mpg while I'm at it! Im a bigger guy (6'0" 215lbs) but the rebel fits me just...
  18. Engine, Carburetor, Fuel System & Exhaust
    Hey guys! I've been Trying to figure out how to get my carb off my bike for about a week now, but I've had no luck. I can get the tank and seats and all that off, but no luck getting to the carb so I can clean it out. Can someone help me?
  19. Honda Rebel Room
    I am needing to get a new set of tires for my 2009 rebel, I don't have a front fender either and the back fender will be soon one from blue collar.com with that in mind. I am wanting a set of tires that are taller then the originals and to know of any links and good places you have ordered your...
  20. New Member Introductions
    I am somewhat of a new member and I'm happy to see all these Rebel fans! (I used to be a crotch rocket rider in the late 90s and early 00s) I just recently got back into riding because not only did I feel the calling, but also just got sick and tired of being a slave to gas. Check out my rebel...
Top