Honda Rebel 250 & 450 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Engine, Carburetor, Fuel System & Exhaust
    Hey guys, 97 Nighthawk 250 owner here. I recently replaced my clutch cable and have had nothing but problems since. When I accelerate, the engine revs up and it gets me moving a little bit, but there’s no power behind it. Especially trying to go up hill. I’ve tried adjusting the cable a thousand...
  2. Gears, Sprockets & Chains
    So I bought an 01 Rebel 250 and the clutch went out on it. I replaced the clutch but now when I put it into gear it violently shuts off. This is my first bike and I really don't know what it is I might've done wrong. I tried adjusting the cable, both up top on the handle and down by the clutch...
  3. Wrenching - General Discussions & Tech Talk
    i just replaced the friction plates in my 2005 honda rebel. after putting everything back together im having some issues. the bike starts up fine, but when i go into first gear the bike starts rolling (with the clutch pulled in). did i mess something up or is it as simple as adjusting something...
  4. Rebel Reading Room (FAQs)
    My clutch cable snapped right at the lever base. Cable is still there dangling but not connected to the base anymore. It's still in the lever. Just got my 85 Rebel so still kinda new. I was hoping this is an easy fix that I could do myself. Thanks!
1-4 of 4 Results