Honda Rebel 250 & 450 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Wrenching - General Discussions & Tech Talk
    So I’ve recently bought a Honda shadow VT600C dual carb and it wouldn’t run at all when I got it. It would crank but that’s about it. I’ve removed, disassembled and cleaned the carbs and now she starts. I’m having issues with airflow adjustment, idle adjustment and so forth. The bottom left side...
  2. Engine, Carburetor, Fuel System & Exhaust
    Hello everyone! I’ve been working on my carb and was wondering how to adjust my idle screw or what the correct adjustment would be for it?
  3. Engine, Carburetor, Fuel System & Exhaust
    I was given a 2005 honda rebel 250 for free, but unfortunately the previous owner cut the exhaust pipes out and appears they have removed all the baffling. I have read posts that range from "Cut pipes didn't rejet bike runs great" to "will never run correctly". when I opened up the carb, there...
  4. Engine, Carburetor, Fuel System & Exhaust
    Hi I just made an account and I bought a rebel 250 recently and by this point I have no idea what to do next to try and solve the problem but basically to make a story a bit shorter I am having a problem with my fuel/air where basically anytime I try to crank the throttle I can literally feel...
  5. Engine, Carburetor, Fuel System & Exhaust
    Last time I set my carb up, it was in the 40s (degF). Now it's in the 80s. The bike starts and runs fine as it ever did, but it smells a little like it's running rich. I used to have to retune my '64 Ford any time the weather changed more than 30 degrees on average. I got the impression that...
  6. Engine, Carburetor, Fuel System & Exhaust
    Hello all, I’ve used this forum as a guest for a long time and I’d first like to thank all of you for the help y’all have provided throughout the years. I’ve recently purchased 2006 250 and have (strictly cosmetically) modded my bike to fit the bobber style. Motor and carburetor have remained...
  7. Newbie Lounge
    Hi there! I'm new to this forum, but I recently got an old 2002 rebel working again and I'm trying to work out some kinks. The first question I have concerns the throttle. Whenever I try to start the bike, it has a blip in the throttle where the bike tries to die, and I either have to try to...
  8. Engine, Carburetor, Fuel System & Exhaust
    I recently rebuilt my 2001 cmx250 carb due to the float sticking. now when I accelerate with more than half throttle it almost dies and bogs down.(won't go past 45ish mph.) I have tied messing with mixture adjustment and air filter, no avail. Should I try different jets? Or a different Rebuild...
  9. Engine, Carburetor, Fuel System & Exhaust
    The engine idles and runs well. However, if I turn the throttle about 1/8 of a turn and hold it there, the engine revs up a little then as I'm turning it then dies at the same spot every time. I can turn the throttle past and the engine will continue to rev all the way up but there is no fuel...
1-9 of 9 Results
Top