Honda Rebel 250 & 450 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 65 Results
  1. Running Gear: Wheels, Tires, Suspension & Brakes
    Hello guys! I have noticed that many guys that have turned their bike into bobber are using front off road tire and rear street tire... Is there any use in that or it is purely cosmetic? I like the look but I guess it is not really safe... Anyone here use this setup?
  2. Honda Rebel Room
    been trying to find any info on how he builthis bike. I’ve found a blog on bikermetric about it but no link to any threads or a way to get in touch. Any info would be much appreciated. I would like to start my build and copy this look to my bike. But no luck. Any info would be awesome. Here’s...
  3. New Member Introductions
    Hey guys! I acquired a 2002 Honda Rebel 250. I've searched for 3 months now and this popped up. Traded my old jet ski for it. I have started to make a bit of a bobber out of it. Any tips to help me? Probably going to grab a Ebay solo springer seat, and I may need some help with wiring the brake...
  4. How To's & Tech Guides
    I have an 07 rebel 250, I bought both side covers from bobbercycle.com, they came in looking perfect. The issue I have is that there are no installation instructions in the box and they only came with 3 bolts and 1 nut as far as hardware. Has anyone purchased these covers and had any luck...
  5. New Member Introductions
    Hello. After about 2 years of lurking the forums, I figured I'd finally show my face around here and make a post about my 2001 Cmx250. Started off as my first bike, like many people. Purchased for 800$ not running and and original owner even towed it out to me. Got the bike running Started to...
  6. Running Gear: Wheels, Tires, Suspension & Brakes
    What's the biggest tire I can run on stock 250 forks? Will a 5.0 -18 sawtooth fit after removing the fender and posts? Could I use the stock rim or would It have to be changed? Thanks
  7. Bobbers
    The saga of this bike has had more plot twists than a Stephen King novel: I scored it a few months ago for $300. No title, lots of minor issues, 1 major issue (low compression), and tons of cosmetic flaws. It was bombed around corn fields and left to sit in between. I straightened out some...
  8. Engine, Carburetor, Fuel System & Exhaust
    I recently acquired a bobbed out 01 rebel 250 for pretty cheap, main problem I noticed was that at some point someone converted it from single to dual carb but neglected to add an air filter or anything connecting the carbs to the airbox. I know that this is bad for the engine cuz it lets all...
  9. Honda Rebel Room
    Hey y'all. New member here. I've seen tons of posts and YouTube videos on turning the stock version into bobber but never the reverse. I bought my first bike 07 Rebel 250 - bobber. The previous owner gave me all the OEM parts/fender/lights/seats so now I'm trying to put it back together. So...
  10. Honda Rebel Room
    Anyone have an ignition switch for an 86 CMX250C? Part number 35100-KR3-672. Can’t find one online. Ordered what was supposed to work for my bike from eBay only to have it not work.
  11. Honda Rebel Room
    Anyone know of handle bar risers for an 86 CMX250C? I’m looking to raise my bars like 2-3 inches and cannot find any on google. Any ideas or suggestions other than fabricating?
  12. Cool Mods, Detailing & Appearance
    Hello everyone, my name is Ford and this is my 2012 Honda Rebel. You will have a hard time finding anything wrong with it except for a few small scratches here and there. However, I am going to change the look of this bike pretty dramatically without modifying the frame, forks, engine, carb...
  13. Cool Mods, Detailing & Appearance
    Hey everyone, So i am new to forums and tried digging around everywhere to find information but fell short so I thought I would start a new thread. My buddy gave bought a Triumph Thruxton and gave me his old 2002 Rebel that is currently bobbed. I find the more "standard" riding position more...
  14. New Member Introductions
    Hey y'all, I'm a 4th year mechanical engineering student at the University of Florida down here in Gainesville. I've always had a passion for anything and everything engine related. So yesterday I picked up a 1986 Honda Rebel 250. It needs a new battery but we were able to start it and I...
  15. New Member Introductions
    Hi there from New Zealand, Just bought myself a 1998 Honda Rebel 250cc and in the process of converting it to a bobber. This is my first bike and so far I am loving it. Here are some pics of it so far I've added the seat, fender, indicators and stop light all by myself and no kits.
  16. Cool Mods, Detailing & Appearance
    so ive been rading about mods of all types, and there seems to be some standard mods, like "bobbers" fender chopping, removing weight, the usual, then ive saw some intake mods, trailer hitches, 1 or 2 radios, loved the kick start mod so what im wanting to do here is start this thread for people...
  17. Honda Rebel Room
    Okay, so we all know that the best way to do anything is to take your time and do it right, but sometimes it's more fun to throw caution to the wind and wing it (especially when a seat cost 300 bucks). Now, if I wanted the bobber look for the rebel, but I didn't wanna shell out the cash right...
1-18 of 65 Results
Top