|Topic Review (Newest First)|
|07-13-2019 01:31 PM|
|flitecontrol||If you like the look, they could probably add metal flakes to the paint for added sparkle in the sun. The smaller flakes aren't nearly as visible as the big ones, but still make it sparkle.|
|07-13-2019 12:44 PM|
|07-13-2019 11:08 AM|
|flitecontrol||If you take the fender to the paint store, they can probably match it.|
|07-13-2019 10:50 AM|
Rebel color. Don't have a clue what year the fender is. It does have a mount for a right side brake hose, so it's an earlier one. Chart narrows down to a few colors what it might be. Need to find some color chips.. Thanks.
|07-13-2019 10:43 AM|
Steering stop removed. Yup it will get painted..
Fuses for horn and headlight relocated to rear. (don't know why it's up side down?)
Diode relay for Neutral, Clutch, and Kickstand mount under the gas tank.
|07-12-2019 04:50 PM|
Are you looking for the Rebel paint color, or the Twinstars? If the Rebel, and you know what year you are looking for, see if a member that has that year/color can give you the code.
Does this help? https://www.motorcyclespareparts.eu/...da-color-codes https://www.paintscratch.com/touch_u...da-Motorcycle/
|07-12-2019 04:45 PM|
|07-12-2019 04:36 PM|
|flitecontrol||The paint code for the Rebel is on the airbox. Maybe it's the same for the CM250? With that, it should be possible to get matching paint.|
|07-12-2019 04:27 PM|
|Shadow Shack||Bummer, the OEM paint site ColorRite.com only goes back to 1984 and gets sporadic after that. Nothing for 1980...|
|07-12-2019 03:54 PM|
When putting a cm250 chrome fender on my Rebel, I cut the original mounts off and had shorter, stainless one welded on
When mounting a CM250 chrome fender on my Rebel, I cut the fender mounts down to an inch or so and had stainless plates welded on, which I drilled to fit the Rebel mount bolts.
|This thread has more than 10 replies. Click here to review the whole thread.|