Honda Rebel Forum - View Profile: flitecontrol

flitecontrol flitecontrol is offline

Moderator

  Profile Comments

Showing Profile Comments 1 to 8 of 8
  1. FIESTA
    11-02-2018 01:16 PM
    FIESTA
    Greetings, sir, in one of your posts you mentioned that there is some "mesh" on one of the carburetor jets, and that if the mesh is missing, the bike won't run right. My bike doesn't idle as smooth as it should, carb is clean, has an intermittent miss at idle. I don't see any mesh on the end of either jet. Which jet is supposed to have the mesh? Thanks
  2. happeninghunk
    Hello,
    I found your post about first gen carbs for older (1986) honda rebels.
    Do you still have any of these available?

    Andy
  3. MojoPeterson
    Enjoy your ride Sir. It's been fun.. and Thank You.
  4. flitecontrol
    Thank you, shack4Tom. There are currently six moderators here, and they all deserve credit for making this forum what it is. We work well together and it's a pleasure being associated with them, this forum, and so many great members!
  5. shack4Tom
    I really have to give you honor and respect because you hold this forum on a narrow path, I speak of the Honda Rebel being the beginners bike and a beginner needs to learn everything before advancing to the next level. Some have bought a power plant on two wheels and yet the website remains focused on the Rebel.
    You know how I found this group? I was looking for advice about a larger bike. After all the advice and reading a whole bunch of posts I seen the value of the 250 Rebel built for me specifically. Thankyou Mr. Flight Control for all you do.
  6. flitecontrol
    DD:

    They do here, which is what makes this forum unique. You are welcome.
  7. DesertDog
    Just wanted to drop a profile comment to say thanks for all the help. Most forum noobs don't get that and it's greatly appreciated.
  8. shaun_lina08
    wanted to take a min to tell everyone in this forum thankyou. I wasn't sure how so maybe you could spread the word. Thanks to this site I took an 05 rebel that would hardly run (i traded an ak47 for it)and have it running like a brand new machine. This is my first bike and with only the help of this site i adjusted cleaned and lubed the chain put on a new front tire and completly removed disassembled and soaked the carb. successfully assembled and reinstalled it. I just finished taking it for an hour long test drive and she ran like a bat out of hell! the longer I drove her the smoother she ran I'm six foot tall and about 230 lbs and i burried the spedometer needle. I could not have done it without this site and would have had to pay no telling how much in repairs. thanks so much and ride safe

  About Me

  • About flitecontrol
    Location
    Monroe, Louisiana
    Occupation
    Retired Wildlife Biologist
    Motorcycle # 1
    2001 Honda Rebel
    Motorcycle #2
    1989 Kawasaki Vulcan VN750
    Interests
    Hunting, working on my land
    Gender
    Male
  • Signature
    Keepin' all the left over parts. Gonna use 'em to build another bike!

    '01 & '09 Rebel 250, '06 Ninja 250, '89 VN 750
    Putting your bike year and model in your signature helps others help you!
    Here's how: https://www.hondarebelforum.com/f19/...re-121087.html

  Statistics

Total Posts
Albums
Profile Comments
General Information
  • Last Activity: Yesterday 10:24 PM
  • Join Date: 08-10-2008
  • Referrals: 0

  Friends

Showing Friends 1 to 10 of 27

  Mentions

08-05-2019
01:42 PM - Jonelli mentioned flitecontrol in post Won't start!!
flitecontrol - I'm getting somewh...
08-02-2019
06:07 PM - Jonelli mentioned flitecontrol in post O ring size?
flitecontrol - Sorry, I didn't po...
07-31-2019
08:10 PM - Jonelli mentioned flitecontrol in post Been sitting - won't start
flitecontrol - Thanks for the tip...
06-27-2019
09:45 AM - Frazzie mentioned flitecontrol in post Just Bought Rebel 250
flitecontrol, is auto soap a bran...
05-18-2019
12:09 AM - Makedon mentioned flitecontrol in post Longer axel bolt????
flitecontrol Thanks for the advi...
05-17-2019
07:20 PM - Makedon mentioned flitecontrol in post Longer axel bolt????
flitecontrol . Thank for replying...
03-08-2019
01:01 PM - SoakedKarma mentioned flitecontrol in post Are all carburetor float gaskets the same?
@flitecontrol do you know ID of ac...
01-21-2019
07:22 AM - kryton mentioned flitecontrol in post New Rider from Lynchburg Virginia
...t has 257 now). As flitecontrol said, only use oil t...
10-30-2018
10:51 AM - danc13 mentioned flitecontrol in post Damaged flywheel and crankshaft
...und a post of yours flitecontrol in the "How do I rem...
09-30-2018
06:36 PM - Rebelblue mentioned flitecontrol in post Blue's Rebel Alterations
flitecontrol: Perks of using alum...
09-24-2018
05:34 PM - Rebelblue mentioned flitecontrol in post Blue's Rebel Alterations
flitecontrol: From the way things...
09-20-2018
11:46 AM - Rebelblue mentioned flitecontrol in post Hello from Canada eh!
...m welcome guys! flitecontrol: Thanks for the tip!...
08-25-2018
01:04 PM - hanshyde mentioned flitecontrol in post LED H4 Headlight Bulb
... a month or two. flitecontrol ... fyi I fixed the ...
12:23 PM - hanshyde mentioned flitecontrol in post New to Forum! Need help with tires!
...MT 66 (which I see flitecontrol is happy with) at $1...
07-16-2018
07:37 AM - kryton mentioned flitecontrol in post The dreaded exhaust rattle.. need help!
... now... Concur with flitecontrol and 01-7700, remove ...
06-17-2018
10:57 AM - hanshyde mentioned flitecontrol in post bolt sizes?
...o Cheap Cycle Parts flitecontrol ... have a feeling...
10-11-2017
02:12 PM - kryton mentioned flitecontrol in post Why does my rebel shut off if i pull back too much on throttle?
Ditto 01-7700, flitecontrol, wjmrty Used + choug...
10-03-2017
07:19 AM - kryton mentioned flitecontrol in post Is it time to replace battery
...ets you down. but @flitecontrol instructions to use ...
05-15-2017
03:23 PM - Motorcycleguy mentioned flitecontrol in post Tire rubbing on side
flitecontrol that would be bad, v...
07-29-2015
04:02 AM - mighty mentioned flitecontrol in post My simple mods
SWAMPRABBIT flitecontrol 86d - thanks for the...

  Quotes

10-16-2019
08:05 PM - AmateurExpert quoted flitecontrol in post What does lightly seated mean?
That sounds about right, but I've...
02:40 PM - AmateurExpert quoted flitecontrol in post What does lightly seated mean?
When it begins to bottom out, wit...
10-15-2019
03:48 PM - flitecontrol quoted cdarnold in post Checking oil on a Rebel
I'm wondering if there is a m...
11:52 AM - flitecontrol quoted VAReb in post Leave Open the Puke Tube?
One concern I had was allo...
10:46 AM - 7milesout quoted flitecontrol in post Checking oil on a Rebel
IMO, the recommended oil change i...
10:34 AM - cdarnold quoted flitecontrol in post Checking oil on a Rebel
IMO, the recommended oil change i...
08:47 AM - flitecontrol quoted VAReb in post What are the outcomes?
did you raise the kickstan...
03:30 AM - dt.15r quoted flitecontrol in post What are the outcomes?
Taking my CHP training course soo...
10-14-2019
09:36 PM - cdarnold quoted flitecontrol in post Checking oil on a Rebel
Not sure, but would guess about h...
08:54 PM - flitecontrol quoted cdarnold in post Checking oil on a Rebel
Does anyone know roughly how ...
08:42 PM - flitecontrol quoted 7milesout in post Rebel ... Racing?
I think I've heard of an injur...
12:51 PM - Drapedog quoted flitecontrol in post Custom build Rebel 250
I had a bad experience with Kreem...
11:25 AM - milmat quoted flitecontrol in post Upper engine hanger
And what model year is your bike/...
08:29 AM - flitecontrol quoted dt.15r in post Newbie
Anyone here in Cali? Yes...
01:06 AM - Drapedog quoted flitecontrol in post Custom build Rebel 250
Thanks for the Dime City review. ...
01:00 AM - dt.15r quoted flitecontrol in post Newbie
Welcome to the forum. Thank you,...
10-13-2019
11:48 PM - flitecontrol quoted SoakedKarma in post Bought 1986 Rebel 250
35mm x 52mm x 7mm from any suppl...
10-12-2019
04:15 PM - ingrammc quoted flitecontrol in post yes thank you
Thanks for doing this and expandi...
10-11-2019
08:56 PM - flitecontrol quoted Schwinmp14 in post Help
Should you have to do that with...
02:37 PM - flitecontrol quoted SoakedKarma in post Another Electrical Question
Don't ya just love the junction ...
 
For the best viewing experience please update your browser to Google Chrome