Welcome. If you adjusted the chain or moved the rear wheel back when aligning it, it tightens the rear brake. When moving the rear wheel farther back, first let off on the brake arm (turn adjusting nut counter clockwise) before moving the wheel. When finished, readjust the tension on the rear brake linkage and then tighten the rear axle nut to 65 foot pounds of torque.
Keepin' all the left over parts. Gonna use 'em to build another bike!
Oh goodness. I would not have thought about that either! But now when I visualize the hard linkage from brake pedal to brake, it's a no brainer. But I likely would have done the same thing to start with!
2016 Honda Rebel 250 - The "Piglet."
AFR sensor equipped and downsized to a 0.105" main jet.
The only changes so far.
Bought on 6/29/19 with 44 miles.