|
One of my buds swapped out his bars and had the exact same problem.....turned out that it was a pinched wire as "flitecontrol" mentioned.......For him, it was a matter of checking each wire to find which one was causing the problem.
With the covering on these Rebs housing numerous wires, sometimes one can start the bike, leave it idling and go along each harness, pinching the harness inch by inch to see if the bike shuts down. If it works, at least it can narrow it down for you......It could also be a loose wiring connection in one of the handlebar switch housings that might have gotten pulled a bit to hard during the bar swap-out......
__________________
"Ridin' Ain't A Hobby, It's A Lifestyle"
1986 450 Rebel
|