Mini Turn Signals -- Rear

[cTc]

Here is a mod to get rid of those oversize stock rear turn signals

http://www.choppertowncustoms.com/reb4.jpg http://www.choppertowncustoms.com/reb5.jpg


They increase room for saddle bags, and look much better. They are simple to install, all it takes is a 7/16" drill bit (may be different depending on brand of signal). And someone who is not scared to drill through the fender. Make a cardboard patter of the side of the fender and cut out a hole where the signal will got, place pattern on fender and draw circle onto fender for placement, then do the other side the same way.

[Are (yes it is my name!)]

Just a pic of mine:

http://i9.photobucket.com/albums/a85/are-mnja/HPIM0536.jpg


I got them in the front too....

http://i9.photobucket.com/albums/a85/are-mnja/HPIM0745.jpg
http://i9.photobucket.com/albums/a85/are-mnja/HPIM0743.jpg


Are :wink:

[GearJammer]

Yo Are! Great to see ya back! Checked out all the mods & you've been staying productively busy & kickin' a**! Way to go! :wink:

[Snorebaby]

MAN!! You are gonna turn heads!! The ideas and mods just keep flowing!! Such a young mind full of ideas!!

[ole Ed]

I am trying to clean up the looks of my v45 and am wanting to skinny the signal lights like this but I cant figure out how to do it just by looking at the pics here, so, any info would be greatly appreciated. I know I saw it somewhere on here but just cant seem to find it now. Help please.
Thanx.

[Duke Bushido]

cTc drilled holes in the rear fender and mounted the lights there.

Are fashioned 90 degree L brackets.

Pretty straight-forward stuff.

[ole Ed]

Thanx, but I have came up with my own. Looks good and no droopy rubber mounts. Just had to do some thinkin on it for a while. Wife says it took me so long coz thinkin dont come easy for me. What does she know?