LED's

[Snorebaby]

I purchased a single row LED tag frame from ebay. It is a Signal Dynamics (http://www.signaldynamics.com) tag frame. I expected kinda chinzy metal frame but it is really heavy duty. I also purchased some tag bolt lights. The bolts have a 1/2" shank and I could get only 1/2 a nut on the top 2 bolts so I put a dab of silicone on them to keep them from backing out. I didn't have any blue Loctite. The bottom 2 bolts are fine with a full nut on them.

I wired the tag frame to the running and brake lights. I only wired the tag bolt LED's to the brake light so they only come on when braking.

Key off -- no power
http://home.comcast.net/~snorebaby2/Tag1.jpg

Key on -- bike running
http://home.comcast.net/~snorebaby2/Tag2.jpg

Bike Running -- Brakes Applied
http://home.comcast.net/~snorebaby2/Tag3.jpg

The LED's don't look that bright but they are pretty bright. Will be able to be seen from the back better than just having the one brake light.

[GearJammer]

Very tastefully done! Really dig the mods you're doing, Brother.......subtle up-grades without going overkill. Lookin' GOOD!

[jkersh]

What tires areyou running? And if you dont mind how much did you pay. Sorry for hijacking but Im in the market for tires.

[cTc]

They look like dunlop 404's, but so many of them these days have the same pattern.

[Snorebaby]

That is ok....they are Dunlop D404 (front and rear). I think I paid about $120 (including shipping).