30 tooth rear sprocket

[Fisher]

I just ordered the 30 tooth rear sprocket and am going to change it when it gets in later this week.
For anyone who has done this -- Is it a straightforward job ?? Or is there anything to watch out for ?
I rather learn from others mistakes than make my own mistakes.

Thanks
Justin

[Tanner Remillard]

I did it to mine. Its an easy swap. Just have to disconnect the brake linkage, pull the axle and the tire comes off. Although, with the one I got from Bike Bandit I had to put washers between the sprocket and the wheel hub for each bolt hole to space it. The way the sprocket was made it had a boss on it, and had to have spacers to clear the hub. You'll see when you go to put it on if its the same sprocket.

[boneside]

Hi there!!

Can you supply me with the part number and the place you got your sprocket?? I'd like to get one for my Rebel, but I'm not sure exactly what I need.... Thanks a lot!!

Keep the rubber side down!!

Bone

[Richard Simister]

Got mine from the honda dealer.Made by jt.Called a JT30.

[Tanner Remillard]

I got the 30 tooth one here. I dont know why they have 2 of them listed for different prices? http://www.bikebandit.com/aftermarket-parts-list?d=1170244+1173059+2163981+2164190